ARCHline.XP 2016 Release notes ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.26. Build 266 - New development: Wall elevation view - marker commands are enabled on the floor plan when you define the rectagnle for the section. If you choose a window sized wall elevation view, the saved image will be cropped and the empty parts will be cut off. - Resolved: 0005772: Hatch : Wall hatching on the plot layout is not correct with the copy rectangle/polygon command - A frequently occurring crash or error message is eliminated (profile not found message) - Resolved: 0005712: Terrain : Terrain road side slope does not change ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.25. Build 265 - BIM parameter settings are available in the door/window wizard dialog - Resolved: 0005779: 3D view : Keep section windows of this project updated does not work View menu - Section - Refresh 3D section command refreshes all section windows (so far it was a switch, now it is a command) There is a Refresh command in the Tab commands of a section window that refreshes only the actual section window ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.24. Build 264 - Resolved: 0005777: Room book : Room partitioning linetype is not saved - Resolved: 0005773: 3D View : Extremely long 3D generation - Creating new materials with material drag and drop from file browser to Design Center - now it is possible to define category/subcategory ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.23. Build 263 - Markers: * learning mode disabled (removed from the Options dialog) * marker representation for the wall layer line is disabled - Bug fix: create new material from the Design Center often caused crash. - Development in the perspective dialog: if there is an active 3D window and you select a saved view in the status bar and you don't change it, if you open the perspective dialog, the dialog will show automatically the active view and this view will be selected among the saved views. ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.21. Build 261 - Resolved: 0005771: Project management : Floor structure update error in the Project navigator - Resolved: 0003474: File management : Runtime error message comes during the 3D build process ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.20. Build 260 - Resolved: 0005765: Project management : Opening a new 2D window in drawing mode - Resolved: 0005744: Terrain : Maximum value for horizontal surface elevation is unknown - Resolved: 0005766: Column : Hotspot changes when you define an upper or lower profile ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.19. Build 259 - Resolved: 0005762: Text : Font Type drop down list - possibility of searching by typing characters - Wall elevation view : By default it is created between two wall connection points, instead of the whole selected wall - Resolved: 0005764: Roof : Roof by predefined profile - how to get battens to the end of the roof - Resolved: 0005761: Tiling : Possibility to rotate, mirror tiles - suggestion Now you can rotate and mirror custom tiles. ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.18. Build 258 - Design center categories - the number in brackets besides a category name refers to the number of elements. So far this number was independent from the Brands selection. Now the number shows the number of elements that reflects the "Brands" selection. - Hotspot fix for default countertop edge - Bug fix: Door wizard - door schema #07 caused a crash when you selected it in the dialog - Resolved: 0005760: Tiling : Add custom tile - duplicate tiles command does not work - In Hungarian language the Youtube link is corrected in the Project opening dialog ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.12. Build 257 released version - Resolved: 0005751: Room book : Space volume computation option in the 3D model generation does not work - Resolved: 0005741: Room book : Room book italian template with hatch - pattern appears intstead of solid hatch - Resolved: 0005753: Roof : Roof window hole - angle setting does not work Now the settings can be found in the Roof connection panel and there is a figure to understand the angles. - Resolved: 0005747: Terrain : Terrain by points (polygon) - definition of the first point is strange - Resolved: 0005755: Hatch : Missing wall hatches can be seen only by entering in the wall properties dialog ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.12. Build 255 - Resolved: 0005738: File management : IFC import does not work in case of special characters in the path - Resolved: 0005658: Raster image : Snapshot image transparency does not work - Resolved: 0005758: Layer : Layer is switched on when you copy an area of the drawing - Resolved: 0005757: Project management : Crash when you close a project and open a new one - Bug fix: when you saved a project in ARCHLine.XP 4.5 format, the wall hatches disappeared - Resolved: 0005745: Dimension : Area dimension - when moving the area dimension with marker command, the reference point is lost - Resolved: 0005713: Dimension : Section dimensioning - Move text free does not work (We removed the "Move text free" option from the menu) ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.11. Build 254 - New development : numbering of hotspots in the dialogs where hotspots are represented - Resolved: 0005748: Window : Archline crashes at switching on hidden windows from the window preview bar - New development - Cabinet - from now on you can apply more than one appliance to a cabinet - Resolved: 0005752: Wall : Wall layer priority settings error - Resolved: 0004057: Others : Possibility to move the drawing to the origin and find elements that are extremely far from the origin See the Tools - New origin commands. - Resolved: 0005749: Hatch : Create detailed view - hatch is missing - Resolved: 0005756: Object : Object in a project is not shown in the design center - Resolved: 0005695: Section : Section marker problem - each regeneration changes the view side ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.09. Build 253 - Resolved: 0005556: View Menu : Moving the 3D model by the PgUp/PgDn buttons is slow when shadow representation is on - Resolved: 0005737: Room maker : Door management in room maker fails when you specify a wrong parameter - Resolved: 0005746: Room maker : Inserting a previously saved false ceiling - the same ceiling appears in two paces - Resolved: 0005742: DXF / DWG : Import into current draw option does not work correctly ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.08. Build 252 - Resolved: 0005559: Hatch : Material hatch on layout is wrong - Resolved: 0005584: Image : Clip the image as transparent does not work until you save and reopen the project - Resolved: 0005223: DirectX : File opening error because of Texture optimization settings - Resolved: 0005571: Interface : Rendering icon appears on a wrong place at file opening - Resolved: 0005740: Room maker : For wall finishing you can select only the default - Resolved: 0005739: Object : The value of parameter is invalid message for an existing object - Stair 2D shadow - possibility to edit the 2D representation of the shadow. Now it works as follows. A message appears: MESSAGE+1594 "The stair is temporary converted into a hidden element and replaced by an editable group in floor plan. The stair in 3D remains the same.\nYou can make the stair visible again in 3D view with clicking on stair model and execute Isolate - Show on floor plan command." - Tools - Info - List of elements: new information - the list of farest elements - New command for relocating the origin: #move #origo - Bug fix: snapshot image transparency settings ---------------------------------------------------------------------------------------------------------------------------------- 2016.05.02. Build 248 - Resolved: 0005736: Object : (Smart) Object saving errors ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.29. Build 247 - Resolved: 0005735: DirectX : Shadow representation is gone when you apply a background image in DirectX11 3D window ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.28. Build 245 - Resolved: 0005558: Wall : Strange line appears by cutting a wall - Resolved: 0005702: Roof : Strange lines in the 3D model ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.27. Build 243 - Resolved: 0005733: Smart shapes : Saving of an object causes crash ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.22. Build 239 - Resolved: 0005660: Toolbox : Crash when you want to add a new favourite command - Resolved: 0005421: Room Book : Room book default properties are not applied - Resolved: 0004501: Dimension : Possibility to change the linetype settings dimension line - suggestion - Resolved: 0005731: Slab : Slab with beam structure - beam definition by object - crash ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.21. Build 238 - Resolved: 0005732: Other : Automatic serial number recognition at new ARCHLine installations (for now it works only if you start or install the program in Hungarian or English language) - Resolved: 0005730: Other : Automatic client PC IP recognition does not work if the server and the client are in different subnet - Resolved: 0005728: Room book : Automatic placement - infinite loop in a test project - Resolved: 0005725: Interface : Wall hatch disappears when you change the opening scale - Resolved: 0005533: Room book : Active room book style is not applied by drag and drop - Resolved: 0005529: Dimension : Dimension properties dialog vs property grid - line type parameter is not available in the dialog ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.20. Build 237 - Resolved: 0005715: Text : Section marker text style comes from the Length dimension text style after placing a Length dimension - Resolved: 0005670: Raster image : Snapshot image disappears - Resolved: 0005727: DXF / DWG : DWF import does not work in ARCHLine.XP 2016 Build 233 - Resolved: 0005714: Other : Drawing comparison - wall hatch appears incorrectly in the comparison ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.19. Build 236 - New option for doors/windows representation on the floor plan: 2D not visible - Resolved: 0005459: Room book : Room type and room name are mixed up in Norm I - suggestion - Resolved: 0005708: Section : Wall line is visible on the section view ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.16. Build 235 - Resolved: 0005636: Wall : Global hatch direction setting does not work - Resolved: 0005593: Floor : Edit floors - All building visible option does not work correctly - Resolved: 0005524: Door : Sill representation possibility in 2D - development request It is visible only ins 1:20 opening scale. See the new comment in DLGOFFSET+2985 ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.15. Build 234 - Resolved: 0005692: Printing : Line printing error (These lines are not printable by default, now you can read this information from the tooltip) - Resolved: 0005649: Toolbox : Default toolbox command error - Resolved: 0005517: Layer : It is possible to delete line on a closed layer by Ctrl+Shift+Left mouse click - Resolved: 0005631: Dimension : Building dimension does not work properly (We got back to the old ARCHLine.XP 2015 method) ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.14. Build 233 - Resolved: 0005671: Window : 3D window background color setting does not work in Directx11 mode - Resolved: 0005708: Section : Wall line is visible on the section view ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.13. Build 232 - When you place a predefined stair, new options are available: with the Left/Right subcommands you can switch between sides, making easier the path definition for the stair. ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.12. Build 231 - Resolved: 0005723: Section : Show option in the section line local menu - suggestion It works only on active section windows. There is the "Show" command in the marker commands of the endpoint of the section line. ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.10. Build 230 - Resolved: 0005696: Window : Window with shutters - representation error in 2D and 3D - Resolved: 0005718: Door : Window is placed instead of door ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.08. Build 228 - Resolved: 0005706: Raster image : saving of the clipped image does not work - Resolved: 0005565: Line : Invisible construction line in a project (QuartierMuldenbogen.pro) Solution: for the construction line you cannot edit the line thickness - Resolved: 0005719: DirectX : ARCHLine crashes on an object during the image generation ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.07. Build 227 - Resolved: 0005716: Image : ARCHLine crashes in DirectX 11 mode because of large images ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.05. Build 225 - Resolved: 0005711: Wall : Global hatching setting does not work in the wall properties dialog ---------------------------------------------------------------------------------------------------------------------------------- 2016.04.02. Build 222 - Resolved: 0005697: Line : Half angle command does not work with very small angles - Resolved: 0005709: File management : Crash at file opening (romeo.pro) - Resolved: 0005710: Interface : Duplication in the category names - Resolved: 0005565: LIne : Invisible construction line in a project (QuartierMuldenbogen.pro) - Stair 2D Shadow\0", "#stair duplicate command is back again. There is a small difference: the current command creates a group. ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.31. Build 220 - Resolved: 0005700: Dimension : Elevation on section - dimension text position on the top of the dimension marker - request - Resolved: 0005698: Room book : Illumination area and illumination area ratio refreshing error ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.30. Build 219 - Resolved: Add-On - Raster image calibration - Define Raster Image Scale crashed at the end of the calibration when you clicked in the summary dialog on an empty area. - Resolved: Interior - Object - Sanitary Ware - the downloaded elements did not appear in the Design Center because those were not categorized automatically. ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.29. Build 218 - Resolved: 0005701: Hatch : Technical shadow problem - unpredictable shadow occurs ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.25. Build 215 Released version - The quality of exterior rendering is enhanced ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.24. Build 213 - Resolved: 0005699: KBB : Multiple profile does not work for cabinet doors ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.18. Build 210 - Resolved: 0005554: Room book : Automatic placement can't be finished - user must exit from the program - Resolved: 0005680: Room book : Room book table jumps away and falls apart, depending on the used options - Resolved: 0005689: Wall : Wall frames with different heights under a roof behave differently - Resolved: 0005688: Wall : Window or hole in an arc wall is not visible - Coloured Floor Plan cutting height option is canceled from the Options dialog. Now you have to defint the cutting height when you start the command. - Resolved: 0005694: Terrain : Plateau slope angle input error - asks the parameter in meter instead of degree - Render image size is limited to 640x480 pixels in the trial version ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.16. Build 204 - Resolved: 0005686: Printing : Facade shading is incorrect on the printing - 3D image window is denoted in the window title with [Image] ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.11. Build 199 - Resolved: 0005390: Object : Replace from drawing - you have to click twice - Resolved: 0005580: Room maker : Curtain - cogged wheel icon parameters are not consistent with the parameters in the dialog - Resolved: 0005208: Door : 2D shape option is not developed in the Door/Window wizard ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.09. Build 197 - Resolved: 0005644: Others : 3D build error ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.06. Build 194 - Resolved: 0005684: Other : Italian TeamViewer in the installation files (TeamViewer_ITA.exe) - development request - Rendering - we changed to a newer RED Render eingine version (4.2). ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.04. Build 191 - Resolved: 0005681: Window : Hole window cannot be replaced by another from the window library ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.03. Build 190 - New development : Linear light sources - the diameter setting of the light solid (this can appear in 3D view or in the sendering) is visible. So far it was a constant value for the Linear light solid representation. - Resolved: 0005677: Dimension : Dimension is lost when you change the colour of the balustrade ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.02. Build 189 - Resolved: 0005679: Virtual staging : Outdoor virtual staging with known distances - crash ---------------------------------------------------------------------------------------------------------------------------------- 2016.03.01. Build 188 - Resolved: 0005673: Terrain : ARCHLine crashes when you delete a plateau from a terrain - Resolved: 0005462: Wall : Wall layer hatch changes differently depending on the dialog where we change thickness of the wall layer ---------------------------------------------------------------------------------------------------------------------------------- 2016.02.29. Build 187 - File menu - Options - Item settings - Select raster images by their frames only. (Press Shift+Left click to select with a click over the image). Checkbox is off: you can select the images by clicking on it (inside or on the frame). Checkbox is on: you can selct the images by either clicking on the frame of clicking inside by pressing the Shift button simultaneously. - Resolved: 0005613: Roof : Roof window does not cut the rafters properly - Resolved: 0005664: Roof : Roof error (ID 78462) - Downloading an automatic update: Build number is displayed in the tooltip - Mtextur material download is available (new possibility to download materials from external websites) - Resolved: 0005669: Roof : Incorrect roof rafter representation after creating a hole 2016.02.15. Build 173 - Resolved: 0005574: Roof : Hole creation in a projected roof fails - Resolved: 0005641: Hatch : Invisible hatch - When you import something from 3D Warehouse with "Light" in the name, an automatic light source assignment will be done. ---------------------------------------------------------------------------------------------------------------------------------- 2016.02.09. Build 168 - Resolved: 0005652: Roof : Roof batten representation problem ---------------------------------------------------------------------------------------------------------------------------------- 2016.02.03. Build 162 - Gamma Ray export: not available from ARCHLine.XP 2016 - Resolved: 0005654: File management : stl export does not work - Resolved: 0005655: Room book : Room book consignation command crashes on the plot layout - New commands for making the translations easier: systemdialog replace file A dialog comes up and then you can select a folder. The following translation file will be saved into the selected folder: DlgStrs50XXX.xml -> it is a conversion of Dlgstrs50.XXX into an XML file, where XXX refers to the language. Copy the DlgStrs50XXX file to this folder: c:\ProgramData\CadLine\ARCHlineXP2016\Support\.. Type the following command: usertype 6 From now on, you can see the numbers and translations from the DlgStrs50XXX.xml file in the dialogs. If you change a translation in DlgStrs50XXX.xml and then you execute the "systemdialog replace refresh" command in ARCHLine, you will see the changes in the dialogs. See a video about this method here: http://www.archline.hu/files/Seresa/Claudio/TranslationOfDlgstrs50.mp4 ---------------------------------------------------------------------------------------------------------------------------------- 2016.02.02. Build 161 - Resolved: 0005639: Text : Table text color and font style cannot set individually ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.28. Build 155 - Image selection: from now on the default image selection is like before -> click inside the area of the image Now this setting is independent from the project, it is a general setting (stored in the registry). - New menu item in Add-on/Model to Photo (previously: Outdoor Virtual Staging) menu: Edit Matched Photo The old ImageMan commands are moved to ARCHline in that command. ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.19. Build 148 - Resolved: 0005606: Text : Norwegian language resources does not look correctly with Bokmal locale settings - Resolved: 0005640: DXF / DWG : DWG import with images does not work ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.16. Build 145 - Resolved: 0005544: Wall : Windows cut out from an arc wall does not work ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.15. Build 144 - Resolved: 0005578: Hatch : Hatch problem on the plot layout (with copy rectangle/polygon) method - Resolved: 0005548: Beam : Insert into wall as a hole - it does not work in some cases - Resolved: 0005576: Roof : Dormer roof and projected roof wall cutting is strange ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.14. Build 143 - Resolved: 0005549: Balustrade : Blue balustrade looks black on the floor plan - Resolved: 0005586: Balustrade : Balustrade properties - By layer color does not work - Resolved: 0005628: Plot layout : The drawing on the plot layout takes much bigger space as expected ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.13. Build 142 - Resolved: 0005630: Dimension : Area dimensioning - hatch selection and area definition by polygon work different ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.12. Build 141 - Resolved: 0005627: Stair : Convert rests into slabs option does not work ---------------------------------------------------------------------------------------------------------------------------------- 2016.01.08. Build 134 - Resolved: 0005625: Material : After creating a material from a strange material name, you cannot browse for texture files ---------------------------------------------------------------------------------------------------------------------------------- 2015.12.22. Build 133 - File menu - Options - User interface Toolbox right click mode: * Execute Properties command directly * Displays the list of icon related commands - Resolved: 0005612: Wall : Possibility to change the height and elevation of wall layers at once ---------------------------------------------------------------------------------------------------------------------------------- 2015.12.21. Build 132 - Resolved: 0005568: Slab : Slab with layers - ARCHline crashes when you edit the 2nd layer - Resolved: 0005619: Floors : Representation of the same floors from different buildings do not work - Resolved: 0005617: Column : Column ending profile looks strange, depending on the direction of inclination - Resolved: 0005616: Printing : Plot layout refreshing causes a crash - Resolved: 0005575: Balustrade : Edit balustrade in 3D - the balustrade jumps to the active floor in 2D - New command in the Wall menu: Curtain wall ---------------------------------------------------------------------------------------------------------------------------------- 2015.12.15. Build 124 - Info toolbar is on by default ---------------------------------------------------------------------------------------------------------------------------------- 2015.12.10. Build 118 - Curtain wall properties are grouped in the Curtain wall properties dialog: * Mullion properties * Glass wall * Frame properties - New wall command: Niche in the wall - Print to PDF: it is possible to set the margin values (dx/dy) ---------------------------------------------------------------------------------------------------------------------------------- 2015.12.09. Build 117 - New possibilities to represent corpuses with * Closed doors * Slightly open doors * Totally open doors * Without fronts Where to find these possibilities? * Corpus local menu in the 3D window representation - 3D Representation * Interior menu - KBB - 3D representation of cabinets * Property grid of the selected corpuses: 3D representation * The old method: Interior - KBB - KBB properties - Cabinet general properties - The old Lightworks rendering is available by pressing SHIFT button and starting the View menu - Rendering - Rendering menu simultaneously ---------------------------------------------------------------------------------------------------------------------------------- 2015.12.07. Build 115 - Window Wizard : New window schemes with bottom section addition. - Resolved: 0005590: Project navigator : Floor plan is not visible in the Project navigator from the plot layout. - Raster image selection is available only at the edges/corners. ---------------------------------------------------------------------------------------------------------------------------------- 2015.12.04. Build 110 - Development of Window stickers: Left-right command is available (similarly to the doors). command: #window #change #other - Edit Compound Walls dialog became wider - Shadow animation button is placed on the Sun toolbar ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.26. Build 107 - Resolved: 0005577: Wall : Displayed wall layer setting always changes into the first layer when you change something in PG - Rearrangement of the Graphics settings property grid: * The following items have been moved to the Visual effects group: Join surfaces Classes for joining surfaces Approximation lines Dynamic section transparency (%) - Corrections in Rhombus Window 1 and Rhombus Window 2: it was not possible to change the thickness value - Resolved: 0005579: Image : Project texture from photo command leads to an infinite saving loop - Corrections in Bay 30, Bay 45 and Boxbay windows: the wall hatch representation was wrong in 2D - File menu -> Options dialog is a little bit wider to have more place for reading textual information ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.23. Build 104 - Resolved: 0005600: File management : Saving in .stl format is not possible in ARCHline.XP 2016 - Tiling layout printing : the dots in the middle of the tiles are not printed. Those are visible only on the screen. (some users blamed the visible dots on the printed tiling layout) ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.20. Build 103 - Small fix in Door Wizard dialog - Data tab: Instead "Name", "Price" appears in front of the first field - New option for rotating the model in 3D with using only the mouse scroll button. File - Options - User interface - Customizing mouse behaviour DLGOFFSET+5834 "Orbit on a three-button mouse: Click and hold the scroll wheel WITHOUT pressing the SHIFT button" * 3-button mouse: scroll button press and hold = rotation * 3-button mouse: SHIFT button + scroll button press and hold = paning If this option is not selected = ARCHline.XP 2015 compatibility - Now if you do a single left click, the selection does not start immediately ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.17. Build 98 - New possibilities to set the north direction: 1. Click on the North icon. 2. There is a new button for setting the north direction in the "Specify project location" dialog ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.15. Build 97 - Copy/Paste command - there is a new subcommand in the floating menu when you use the copy/paste command: ORIGO This subcommand helps the users to define the origin point easily, instead of switching to global coordinates and typing "0 0". - Edit levels dialog: Building elevation above sea level in m (From now on the Building elevation above sea level is given in m unit, independently from other unit settings.) ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.06. Build 91 - New development: Room by polygon - it is available to define multiple polygon to solve situations where there is a corridor around a lift shaft or other islands, for example. - New user-friendly method of closing a group. When you edit a group, the Close group command appears in the local menu (right mouse button click) even if you are outside of the area of the group. ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.05. Build 89 - Background image command is available from the 3D window title menu ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.03. Build 87 - The following group commands can be found in the Manufacture menu, too: Manufacture menu -> New Group -> Create group in library Manufacture menu -> New Group -> Create local group - Image calibration can be found here: Drafting menu -> Define Raster Image Scale - Placing object - two options in the floating menu: * Rotate 90 minus * Rotate 90 plus - Ceiling local menu -> Add units -> Add lamps: new dialog with two options: * Allow not whole units (You can place on panel cut with profile unit as well) * Placement : Replace panel unit or Add to panel unit ---------------------------------------------------------------------------------------------------------------------------------- 2015.11.02. Build 86 - Wall layer priority has changed to Function - in addition to numbers from 1 to 10, now you can select from the following options: Structure Substrate: plywood or gypsum board Insulation / Air Membrane Finish Not defined ---------------------------------------------------------------------------------------------------------------------------------- 2015.10.30. Build 83 - Wall type colour settings (Demolishing, Existing, Not connected) are moved from the wall properties dialog to the File menu -> Options -> Item settings page - Wall section ---------------------------------------------------------------------------------------------------------------------------------- 2015.10.29. Build 81 - New development : 0005496: Project navigator : Window names should be sorted alphabetically - development request - New development : 0005572: List : Interior Design Consignation - Rounding off decimals is not correct in case of mm unit - development suggestion ---------------------------------------------------------------------------------------------------------------------------------- 2015.10.20. Build 72 - New main menu and toolbox commands: * Building - Wall - Niche in the wall * Building - Slab - Create recess ---------------------------------------------------------------------------------------------------------------------------------- 2015.10.15. Build 68 - Resolved: 0004987: Object : Lamp object distorsion when you add a light source to the object ----------------------------------------------------------------------------------------------------------------------------------